D&D Vacuum System M10/M14/M16/ extern
This new external vacuum system is suitable for housings (ISOTTA , Nauticam, Mangrove etc.). The valve has built-in electronics. By LED indicator green or red, the tightness BEFORE the dive checked. The negative pressure in the housing is permanently monitored. The valve or the electronics are supplied with a CR1 / 3N (2 x LR44) battery. Running time approx. 40 hours.
Material: aluminum
Delivery:
D&D Vacuum System M10/M14/M16/ extern
Valve, pump, pressure gauge, tool, battery CR1 / 3N
Description: 1) Unscrew the valve cap 2) Turn the middle part of the valve clockwise until the LED flashes red 3) Place the pump on top of the valve and pump until the LED flashes green 4) Screw on the valve cap 5) Wait about 5-10 minutes. If the LED stays green, the housing is tight To open the housing - turn the middle part of the valve to the left until the air flows back into the housing At the same time, the battery is no longer in contact
