INON

  • INON
  • >
  • Products Information
  • >
  • Lens
  • >
  • Options

Lens Options

Compatible lens icons
UWL-95S XD
UCL-67 XD
UCL-90 XD
UCL-165 XD
UEL-95 C24 M52
UWL-95 C24 M67
UWL-H100 28LD
UCL-165LD
UCL-100LD
UCL-90LD
UCL-67 LD
UWL-H100 28M67 Type1/Type2
UWL-100 28AD
UWL-105AD
UFL-165AD
UCL-165AD
UWL-100 Achromat Type1/ Type2
UCL-330
UCL-165M67
UCL-100M67
UCL-90 M67
UCL-67 M67
Dome Lens Unit IIIA
Dome Lens Unit IIIG
Dome Lens Unit II for UWL-H100
Dome Lens Unit II for UWL-100
Dome Lens Unit for UWL-100
UFL-G140 SD
UWL-G165 SD

Step-up Ring 52-67

JAN code : 4562121437821

click to enlarge
A step-up ring to install M67 series / 28M67 series attachment lens on a compatible waterproof protector which is equipped with 52mm lens mount.
 
 
Weight: 14g (0.5oz) [air] / approx.9g (0.3oz) [underwater]
 
[Compatible Lens]
UWL-H100 28M67 Type2
UCL-330
UCL-165M67
UCL-100M67
UCL-67 M67
page top

M67 Lens Holder for Float Arm

JAN code : 4562121434127

M67 Lens Holder for Float Arm
A lens holder attached on Float Arm/Mega Float Arm/Mega Float Tube or on the "M5 Joint" installed on Stick Arm/Multi Ball Arm (*1) to carry M67 series/28M67 series attachment lens to help comfortable multiple lens handling underwater. The lens holder is screwed on an arm or M5 Joint through center screw hole.
 
(*1) "Multi Ball Arm SS" is not compatible with the "M5 Joint". "Stick Arm XS-T" and "Multi Ball Arm S" can hold the "M5 Joint" but not compatible with a lens holder.
 
Weight: 50.0g (1.8oz) [air] / approx.25g (0.9oz) [underwater]
 
Compatible Arm/Base etc.
Float Arm S/M/ML
Mega Float Arm S/M
M5 Joint + Stick Arm SS-T/S-T/M-T/L
M5 Joint + Multi Ball Arm ML/L/LL/XL
Mega Float Tube S/M
 
[Compatible Lens]
UWL-H100 28M67 Type1/Type2
UWL-100 Achromat Type1/Type2
UCL-330
UC-165M67
UCL-100M67
UCL-90 M67
UCL-67 M67

*An INON attachment lens with long lens barrel such as "UFL-M150 ZM80" underwater micro fisheye lens or "UWL-S100 ZM80" wide conversion lens is supported by "M67 Lens Holder DP for Float Arm".

click to enlarge

Set-up image on a Float Arm

click to enlarge

Set-up image on a Stick Arm

 

M67 Lens Holder S

JAN code : 4562121431713

click to enlarge
A lens holder attached on an Arm, "D Holder Extension Bar", "Grip Base DIII w/ Rubber Grip D" etc. to carry M67 series/28M67 series attachment lens. Compatible product is sandwiched between Lens Holder [screw] and Lens Holder Base of this product.
 
Weight: 62g (2.2oz) [air] / approx.31g (1.1oz) [underwater]
 
Compatible Arm/Base
Arm SS/S/M/L
YS Arm MS/M
Grip Base D4 (optional D Holder Extension Bar is necessary.)
Grip Base M1 (optional D Holder Extension Bar is necessary.)
D Holder (optional D Holder Extension Bar is necessary.)
Grip Base DIII w/ Rubber Grip D
Grip Base DII w/ Rubber Grip D
 
[Compatible Lens]
UWL-H100 28M67 Type1/Type2
UWL-100 Achromat Type1/Type2
UCL-330
UCL-165M67
UCL-100M67
UCL-90 M67
UCL-67 M67

*An INON attachment lens with long lens barrel such as "UFL-M150 ZM80" underwater micro fisheye lens or "UWL-S100 ZM80" wide conversion lens is supported by "M67 Lens Holder DP-S".

click to enlarge

Set-up image on an Arm

click to enlarge

Set-up image on the D Holder Extension Bar

click to enlarge

Set-up image on the Grip Base DIII

 

M67 Lens Holder W

JAN code : 4562121431720

click to enlarge

 

A lens holder attached on an Arm etc. to carry M67/28M67 series attachment lens. Compatible product is sandwiched between Lens Holder [screw] and Lens Holder [hole], or Lens Holder [screw] and Lens Holder Base of this product. The Lens Holder [hole] is usable as like "M67 Lens Holder for Float Arm" as well.
 
Weight:
When attached on single side
62g(2.2oz) [air] / approx.31g (1.1oz) [underwater]
 
When attached on both sides
106g (3.7oz) [air] / approx.60g (2.1oz) [underwater]
 
Compatible Arm/Base
Installed with Lens Holder [screw] and Lens Holder [hole]
Arm SS/S/M/L
YS Arm MS/M
 
Installed with Lens Holder [screw] and Lens Holder Base
Arm SS/S/M/L
YS Arm MS/M
Grip Base D4 (optional D Holder Extension Bar is necessary.)
Grip Base M1 (optional D Holder Extension Bar is necessary.)
D Holder (optional D Holder Extension Bar is necessary.)
Grip Base DIII w/ Rubber Grip D
Grip Base DII w/ Rubber Grip D
 
Installing Lens Holder [hole] by a screw
Float Arm S/M/ML
Mega Float Arm S/M
M5 Joint + Stick Arm SS-T/S-T/M-T/L
M5 Joint + Multi Ball Arm ML/L/LL/XL
Mega Float Tube S/M
 
[Compatible Lens]
UWL-H100 28M67 Type1/Type2
UWL-100 Achromat Type1/Type2
UCL-330
UC-165M67
UCL-100M67
UCL-90 M67
UCL-67 M67

*An INON attachment lens with long lens barrel such as "UFL-M150 ZM80" underwater micro fisheye lens or "UWL-S100 ZM80" wide conversion lens is supported by "M67 Lens Holder DP-S".

click to enlarge

Set-up image on an Arm

click to enlarge

Set-up image on an Arm

click to enlarge

Set-up image on the D Holder Extension Bar

click to enlarge

Set-up image on the Grip Base DIII

click to enlarge

Set-up image on a Float Arm

 
click to enlarge

Set-up image on a Stick Arm

page top

LD Lens Holder for Float Arm

JAN code : 4562121436169

LD Lens Holder for Float Arm
A lens holder attached on Float Arm/Mega Float Arm/Mega Float Tube or on the "M5 Joint" installed on Stick Arm/Multi Ball Arm (*1) to carry 28LD series/LD series attachment lens to help comfortable multiple lens handling underwater. The lens holder is screwed on an arm or M5 Joint through center screw hole.
In combination with "AD-LD Mount Converter for UCL-165AD" / "M67-LD Mount Converter for UCL-330/165M67", other series attachment lens can be attached as well in addition to 28LD series/LD series lens.
 
(*1) "Multi Ball Arm SS" is not compatible with the "M5 Joint". "Stick Arm XS-T" and "Multi Ball Arm S" can hold the "M5 Joint" but not compatible with a lens holder.
 
Weight: 32g (1.1oz) [air] / approx.7g (0.2oz) [underwater]
 
Compatible Arm etc.
Float Arm S/M/ML
Mega Float Arm S/M
M5 Joint + Stick Arm SS-T/S-T/M-T/L
M5 Joint + Multi Ball Arm ML/L/LL/XL
Mega Float Tube S/M
 
[Compatible Lens]
UWL-H100 28LD
UCL-165LD
UCL-100LD
UCL-90 LD
UCL-67 LD
UCL-165AD
UCL-330
UCL-165M67
UCL-100M67

*1 " AD-LD Mount Converter for UCL-165AD" is necessary.
*2 " M67-LD Mount Converter for UCL-330/165M67" is necessary.

*An INON attachment lens with long lens barrel such as "UFL-M150 ZM80" underwater micro fisheye lens or "UWL-S100 ZM80" wide conversion lens is supported by "LD Lens Holder DP for Float Arm".

click to enlarge

Set-up image on a Float Arm

click to enlarge

Set-up image on a Stick Arm

 

LD Lens Holder S

JAN code : 4562121436145

click to enlarge
A lens holder attached on an Arm, "D Holder Extension Bar", "Grip Base DIII w/ Rubber Grip D" etc. to carry 28LD series/LD series attachment lens. Compatible product is sandwiched between Lens Holder [screw] and Lens Holder Base of this product.
In combination with "AD-LD Mount Converter for UCL-165AD" / "M67-LD Mount Converter for UCL-330/165M67", other series attachment lens can be attached as well in addition to 28LD series/LD series lens.
 
Weight: 44g (1.6oz) [air] / approx.14g (0.5oz) [underwater]
 
Compatible Arm/Base
Arm SS/S/M/L
YS Arm MS/M
Grip Base D4 (optional D Holder Extension Bar is necessary.)
Grip Base M1 (optional D Holder Extension Bar is necessary.)
D Holder (optional D Holder Extension Bar is necessary.)
Grip Base DIII w/ Rubber Grip D
Grip Base DII w/ Rubber Grip D
 
[Compatible Lens]
UWL-H100 28LD
UCL-165LD
UCL-100LD
UCL-90 LD
UCL-67 LD
UCL-165AD
UCL-330
UCL-165M67
UCL-100M67

*1 " AD-LD Mount Converter for UCL-165AD" is necessary.
*2 " M67-LD Mount Converter for UCL-330/165M67" is necessary.

*An INON attachment lens with long lens barrel such as "UFL-M150 ZM80" underwater micro fisheye lens or "UWL-S100 ZM80" wide conversion lens is supported by "LD Lens Holder DP-S".

click to enlarge

Set-up image on an Arm

click to enlarge

Set-up image on the D Holder Extension Bar

click to enlarge

Set-up image on the Grip Base DIII

 
 

LD Lens Holder W

JAN code : 4562121436152

click to enlarge

 

A lens holder attached on an Arm etc. to carry 28LD series/LD series attachment lens. Compatible product is sandwiched between Lens Holder [screw] and Lens Holder [hole], or Lens Holder [screw] and Lens Holder Base of this product. The Lens Holder [hole] is usable as like "LD Lens Holder for Float Arm" as well.
In combination with "AD-LD Mount Converter for UCL-165AD" / "M67-LD Mount Converter for UCL-330/165M67", other series attachment lens can be attached as well in addition to 28LD series/LD series lens.
 
Weight:
When attached on single side
44g (1.6oz) [air] / approx.14g (0.5oz) [underwater]
 
When attached on both sides
69g (2.4oz) [air] / approx.20g (0.7oz) [underwater]
 
Compatible Arm/Base
Installed with Lens Holder [screw] and Lens Holder [hole]
Arm SS/S/M/L
YS Arm MS/M
 
Installed with Lens Holder [screw] and Lens Holder Base
Arm SS/S/M/L
YS Arm MS/M
Grip Base D4 (optional D Holder Extension Bar is necessary.)
Grip Base M1 (optional D Holder Extension Bar is necessary.)
D Holder (optional D Holder Extension Bar is necessary.)
Grip Base DIII w/ Rubber Grip D
Grip Base DII w/ Rubber Grip D
 
Installing Lens Holder [hole] by a screw
Float Arm S/M/ML
Mega Float Arm S/M
M5 Joint + Stick Arm SS-T/S-T/M-T/L
M5 Joint + Multi Ball Arm ML/L/LL/XL
Mega Float Tube S/M
 
[Compatible Lens]
UWL-H100 28LD
UCL-165LD
UCL-100LD
UCL-90 LD
UCL-67 LD
UCL-165AD
UCL-330
UCL-165M67
UCL-100M67

*1 " AD-LD Mount Converter for UCL-165AD" is necessary.
*2 " M67-LD Mount Converter for UCL-330/165M67" is necessary.

*An INON attachment lens with long lens barrel such as "UFL-M150 ZM80" underwater micro fisheye lens or "UWL-S100 ZM80" wide conversion lens is supported by "LD Lens Holder DP-S".

click to enlarge

Set-up image on an Arm

click to enlarge

Set-up image on an Arm

click to enlarge

Set-up image on the D Holder Extension Bar

click to enlarge

Set-up image on the Grip Base DIII

click to enlarge

Set-up image on a Float Arm

click to enlarge

Set-up image on a Stick Arm

 

page top

AD Lens Holder for Float Arm

JAN code : 4562121435209

AD Lens Holder for Float Arm
A lens holder attached on Float Arm/Mega Float Arm/Mega Float Tube or on the "M5 Joint" installed on Stick Arm/Multi Ball Arm (*1) to carry AD series/28AD series attachment lens to help comfortable multiple lens handling underwater. The lens holder is screwed on an arm or M5 Joint through center screw hole.
Usable to hold SD Mount series attachment lenses for GoPro® as well.
 
(*1) "Multi Ball Arm SS" is not compatible with the "M5 Joint". "Stick Arm XS-T" and "Multi Ball Arm S" can hold the "M5 Joint" but not compatible with a lens holder.
 
Weight: 26g (0.9oz) [air] / approx.6g (0.2oz) [underwater]
 
Compatible Arm etc.
Float Arm S/M/ML
Mega Float Arm S/M
M5 Joint + Stick Arm SS-T/S-T/M-T/L
M5 Joint + Multi Ball Arm ML/L/LL/XL
Mega Float Tube S/M
 
[Compatible Lens]
UWL-100 28AD
UWL-105AD
UFL-165AD
UCL-165AD
UFL-G140 SD、UCL-G165 SD
 

*An INON attachment lens with long lens barrel such as "UFL-M150 ZM80" underwater micro fisheye lens or "UWL-S100 ZM80" wide conversion lens is supported by "AD Lens Holder DP for Float Arm".

click to enlarge

Set-up image on a Float Arm

click to enlarge

Set-up image on a Stick Arm

 

AD Lens Holder

JAN code : 4562121431850

click to enlarge

 

A lens holder attached on an Arm etc. to carry AD series/28AD series attachment lens. Compatible product is sandwiched between Lens Holder [screw] and Lens Holder [hole], or Lens Holder [screw] and Lens Holder Base of this product. The Lens Holder [hole] is usable as like "AD Lens Holder for Float Arm" as well.
Usable to hold SD Mount series attachment lenses for GoPro® as well.
 
Weight:
When attached on single side
38g(1.3oz) [air] / approx.12g (0.4oz) [underwater]
 
When attached on both sides
57g (2.0oz) [air] / approx.18g (0.6oz) [underwater]
 
Compatible Arm/Base
Installed with Lens Holder [screw] and Lens Holder [hole]
Arm SS/S/M/L
YS Arm MS/M
 
Installed with Lens Holder [screw] and Lens Holder Base
Arm SS/S/M/L
YS Arm MS/M
Grip Base D4 (optional D Holder Extension Bar is necessary.)
Grip Base M1 (optional D Holder Extension Bar is necessary.)
D Holder (optional D Holder Extension Bar is necessary.)
Grip Base DIII w/ Rubber Grip D
Grip Base DII w/ Rubber Grip D
 
Installing Lens Holder [hole] by a screw
Float Arm S/M/ML
Mega Float Arm S/M
M5 Joint + Stick Arm SS-T/S-T/M-T/L
M5 Joint + Multi Ball Arm ML/L/LL/XL
Mega Float Tube S/M
 
[Compatible Lens]
UWL-100 28AD
UWL-105AD
UFL-165AD
UCL-165AD
UFL-G140 SD, UCL-G165 SD
 

*An INON attachment lens with long lens barrel such as "UFL-M150 ZM80" underwater micro fisheye lens or "UWL-S100 ZM80" wide conversion lens is supported by "AD Lens Holder DP-S".

click to enlarge

Set-up image on an Arm

click to enlarge

Set-up image on an Arm

click to enlarge

Set-up image on the D Holder Extension Bar

click to enlarge

Set-up image on the Grip Base DIII

click to enlarge

Set-up image on a Float Arm

 
click to enlarge

Set-up image on a Stick Arm

page top

M67-LD Mount Converter for UCL-330/165M67

JAN code : 4562121436183

click to enlarge
The M67-LD Mount Converter is exclusively for 28LD Mount/LD Mount compatible product to attach M67 Mount series attachment lens "UCL-330 Close-up Lens" / "UCL-165M67 Close-up Lens" / "UCL-100M67 Close-up Lens"..
 
*Using this product will have significant vignetting on image corners with / without a lens on land and underwater at zoom range from wide end to middle. Zoom to telephoto side to eliminate vignetting.
 
Weight: 33.5g (1.2oz) [air] / approx.17g (0.6oz) [underwater]
 
[Compatible Lens]
UCL-330
UCL-165M67
UCL-100M67

AD-LD Mount Converter for UCL-165AD

JAN code : 4562121436176

click to enlarge
The AD-LD Mount Converter is exclusively for 28LD Mount/LD Mount compatible product to attach AD series attachment lens "UCL-165AD Close-up Lens".
 
*Using this product will have significant vignetting on image corners with/without a lens on land and underwater at zoom range from wide end to middle. Zoom to telephoto side to eliminate vignetting.
 
Weight: 48.2g (1.7oz) [air] / approx.23g (0.8oz) [underwater]
 
[Compatible Lens]
UCL-165AD
page top

Lens Hood III

JAN/EAN code : 4570018120251

Lens Hood III
 
[Set-up example]
Set-up example

A lens hood for “UWL-95S”, ”UWL-95 C24” and ”UWL-H100” wide lenses. The hood blocks unnecessary ambient light in back-lit condition etc. to prevent ghosting/flare and also protects lens surface from accidental damage.
 
No vignetting at zoom wide end both underwater and on land.
 
Confirmed camera/housing
Sony [MPK-URX100A] + Olympus [PT-059], [PT-058], [PT-056]
Other camera/housing combinations have not been tested, so please note that vignetting may occur depending on the lens and housing lens surface conditions.
 
Outer diameter : φ114 mm/4.4 in.
Length : 53 mm/2.0 in
Weight :[Air] 8 g/0.2 oz, [Underwater] approx. 54 g/1.9 oz
 

Not usable when using “Dome Lens Unit III”.

 
[Compatible Lens]
UWL-95S XD
UEL-95 C24 M52
UWL-95 C24 M67
UWL-H100 28LD
UWL-H100 28M67 Type1/Type2

Lens Hood II for UWL-100 28AD

JAN code : 4562121437586

Lens Hood II for UWL-100 28AD
Attached on the UWL-100 28AD
The Lens Hood specifically designed for UWL-100 28AD to shade unnecessary light from outside of view angle and reduce flare / ghost which could happen in backlit condition. The hood also protects lens surface from damage.
 
Outer diameter: φ114mm (4.5in.)
Length: [standalone] 53mm (2.1in.)
     : [with UWL-100 28AD] 70.7mm (2.8in.)
Weight: [standalone] 75g (2.6oz) [air] / approx.22g (0.8oz) [underwater]
     : [with UWL-100 28AD] 446g (15.7oz) [air] / approx.231g (8.1oz) [underwater]
 
*Not usable together with "Dome Lens Unit II for UWL-100" and "Dome Lens Unit for UWL-100"
 
[Compatible Lens]
UWL-100 28AD
page top

Dome Spacer for UWL-100 28AD

JAN code : 4562121432291

click to enlarge
"Dome Spacer for UWL-100 28AD" is necessary to attach "Dome Lens Unit II for UWL-100" or "Dome Lens Unit for UWL-100" on to "UWL-100 28AD".
 
Weight: 32.9g (1.2oz) [air]
 
[Compatible Lens]
Dome Lens Unit Ii for UWL-100
Doem Lens Unit for UWL-100
UWL-100 28AD
page top

M67 Lens Arm

JAN code : 4562121433298

click to enlarge
 
click to enlarge

Usage example of the M67 Lens Arm

The M67 Lens Arm is attached on ball-joint arm system enabling M67 Mount Base non-compatible underwater housing to use INON close-up lens "UCL-330"/ "UCL-165M67".
 
Weight: 55.8g (2.0oz) [air] / approx.35g (1.2oz) [underwater]
 
[Comaptible Lens]
UCL-330
UCL-165M67
page top

PT Housing 67mm Adapter Ring (For UWL-100 Type1 to PT-005/005s/007/010)

JAN code : 4562121431638

click to enlarge
UWL-100 Type1 requires this adapter ring when attaching to Olympus [PT-010, PT-007, PT-005].
 
*The combination of PT-005 Adapter Ring and UWL-100 Type1 is also required for PT-010, PT-007 with C-4100Z, C-3030Z, C-3000Z. Please see below table for detail.
 
Weight: 27.6g (1.0oz) [air] / approx.17g (0.6oz) [underwater]
 
[Compatible Lens]
UCL-330
UCL-165M67
UWL-100 Achromat Type1
page top

Neoprene Carry Pouch S

JAN code : 4562121431553

click to enlarge
Carry pouch is made of neoprene which is used for wet suit and can bring to underwater. It is recommended to keep attachment lens in this carry pouch until just before you use the lens to prevent accidental damage.
 
Outer size / Height: 75mm / 95mm (3.0in / 3.7in)
 
[Compatible Lens]
UCL-165LD
UCL-100LD
UCL-90 LD
UCL-67 LD
UWL-105AD
UCL-165AD
UCL-330
UCL-165M67
UCL-100M67
UCL-90 M67
UCL-67 M67

UWL-100 Neoprene Carry Pouch

JAN code : 4562121431645

click to enlarge
Carry pouch is made of neoprene which is used for wet suit and can bring to underwater. It is recommended to keep attachment lens in this carry pouch until just before you use the lens to prevent accidental damage.
 
Outer size / Height: 105mm / 100mm (4.1in / 3.9in)
 
[Compatible Lens]
UWL-H100 28LD
UWL-H100 28M67 Type1/Type2
UWL-100 28AD
UWL-100 Achromat Type1/Type2

UFL-165AD Neprene Carry Pouch

JAN code : 4562121433465

click to enlarge
Carry pouch is made of neoprene which is used for wet suit and can bring to underwater. It is recommended to keep attachment lens in this carry pouch until just before you use the lens to prevent accidental damage.
 
Outer size / Height: 115mm / 140mm (4.5in / 5.5in)
 
[Compatible Lens]
UFL-165AD
page top

Protective Cover for UFL-G140 SD

JAN code : 4570018120756 (OR : ORANGE)
JAN code : 4570018120916(PK : PINK)

保護カバー for UFL-G140 SD OR
Neoprene lens cover to protect " UFL-G140 SD " when attached on GoPro housing.
You can choose from either pink or orange.
 
The neoprene itself is cushioned to protect the lens when not in use. As the cover is usable underwater, the lens surface can be protected right before use. And when you remove the cover underwater, you can put it on your arm not to lose.
 
[Compatible Lens]
UFL-G140 SD
Protective Cover for UFL-G140 SD(PK)
Protective Cover for UFL-G140 SD(OR)

Dome Port Cover S (OR)

JAN code : 4570018120763

 
Dome Port Cover S (OR)

The orange color dramatically improves visibility underwater/surface.

Dome Port Cover S (OR)
Set-up image
The Dome Port Cover S is made of neoprene as same as wet suits. It is recommended to cover compatible dome lens all the time to prevent accidental damage unless shooting images. The Dome Port Cover S has slits on its top and bottom to help easy and speedy installation/removal on a dome lens/port equipped with a hood.
 
[Compatible Lens]
Dome Lens Unit IIIA
Dome Lens Unit IIIG
Dome Lens Unit II for UWL-H100
Dome Lens Unit II for UWL-100
Dome Lens Unit for UWL-100

*Never put wet lens cover on compatible lens/port on land. Doing so may cause degradation of the lens coating or glass itself resulting in spotting or discoloration.

Front Cover 110

JAN code:4562121438989

Front Cover110
 
Set-up image

Set-up image

 
The Front Cover 110 is made of neoprene as same as wetsuits to protect lens surface both on land/underwater when the lens is not in use (during transportation or installation/removal of the lens).  This neoprene cover is cylindrical design with 110mm/4.3in. diameter to fit to an INON wide lens attached with a lens hood.  Also usable as a cover for INON Z-330/D-200 strobe to protect their front dome lens. 
 
Compatible Lens

UWL-H100 28LD
UWL-H100 28M67 Type1/Type2
UWL-100 28AD

Front Port Cover 100

JAN code : 4562121430556

Front Port Cover 100
The Front Port Cover 100 is made of neoprene which is used for wet suits. It is recommended to cover Dome Lens Unit with this Front Port Cover 100 until just before you use to prevent accidental damage.
 
[Compatible Lens]
Dome Lens Unit II for UWL-S100 M80
UFL-G140 SD
page top

Snap-on Lens Cap M67

JAN code : 4562121437227

click to enlarge
Set-up image

Set-up image

The Snap-on Lens Cap M67 is a plastic lens cap for close-up lenses and digital SLR housing lens ports to protect front optical element. Spring loaded center tabs provide easy installation and removal only by squeezing the tabs. Packaged lanyard to avoid loss of the lens cap when not being attached on a lens/port.
 
[Compatible Lens]
UCL-165LD
UCL-330
UCL-165M67
UCL-100M67

*The Snap-on Lens Cap M67 comes with the "UCL-100LD" / "UCL-100M67", so not necessary to prepare separately.

page top